أعلى الصفحة

ABI electrical polyimide-film silicone-adhesive insulation | double-sided | 7176

العنصر رقم WEB0097
IN-27176 is a double-sided polyimide (PI) tape with silicone adhesive allowing for an excellent performance in electrical and thermal insulation.    Top performance features: High dielectric strength Outstanding thermal endurance with excellent puncture and tear resistance.Good heat and solvent resi
لا يمكن طلب هذا المنتج في الوقت الراهن.

وصف

IN-27176 is a double-sided polyimide (PI) tape with silicone adhesive allowing for an excellent performance in electrical and thermal insulation. 
 
Top performance features:
  • High dielectric strength
  • Outstanding thermal endurance with excellent puncture and tear resistance.Good heat and solvent resistance
  • Adhesion is stronger on the white film liner side than on the transparent side  
Application:
  • Electrical and high temperature insulation, e.g. protection of circuit board gold finger contacts during wave solder
  • Fixation of electronic and electrical parts, e.g.  transformers, motors and coils 
  • High temperature masking, e.g. with powder coating
Our tape is the alternative product for:

Nitto
Nitto P-223 AMB DOUBLE-COATED KAPTON POLYIMIDE FILM

Available standard sizes:
  • 19MMX20M
  • 58MMX20M
If you need a customized size, please contact our product specialist.

المواصفات

-- PROPERTIES --
----------
Application
INSULATION
Product
27176
Color
AMBER
Liner
Transparant and white film
Total thickness (micron)
135
Backing material
POLYIMIDE FILM
Thickness backing
0.025MM
Adhesive system
SILICONE ADHESIVE
Thickness adhesive
2x 0.055MM
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
63
Peel adhesion 180° (N/25MM) (Afera 5001)
12N/25MM
Tensile strength (N/25mm)
122.57
Dielectric breakdown (V)
6000
Insulation class (°C)
180

ABI electrical polyimide-film silicone-adhesive insulation | double-sided | 7176

العنصر رقم WEB0097
IN-27176 is a double-sided polyimide (PI) tape with silicone adhesive allowing for an excellent performance in electrical and thermal insulation.    Top performance features: High dielectric strength Outstanding thermal endurance with excellent puncture and tear resistance.Good heat and solvent resi
لا يمكن طلب هذا المنتج في الوقت الراهن.

وصف

IN-27176 is a double-sided polyimide (PI) tape with silicone adhesive allowing for an excellent performance in electrical and thermal insulation. 
 
Top performance features:
  • High dielectric strength
  • Outstanding thermal endurance with excellent puncture and tear resistance.Good heat and solvent resistance
  • Adhesion is stronger on the white film liner side than on the transparent side  
Application:
  • Electrical and high temperature insulation, e.g. protection of circuit board gold finger contacts during wave solder
  • Fixation of electronic and electrical parts, e.g.  transformers, motors and coils 
  • High temperature masking, e.g. with powder coating
Our tape is the alternative product for:

Nitto
Nitto P-223 AMB DOUBLE-COATED KAPTON POLYIMIDE FILM

Available standard sizes:
  • 19MMX20M
  • 58MMX20M
If you need a customized size, please contact our product specialist.

المواصفات

-- PROPERTIES --
----------
Application
INSULATION
Product
27176
Color
AMBER
Liner
Transparant and white film
Total thickness (micron)
135
Backing material
POLYIMIDE FILM
Thickness backing
0.025MM
Adhesive system
SILICONE ADHESIVE
Thickness adhesive
2x 0.055MM
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
63
Peel adhesion 180° (N/25MM) (Afera 5001)
12N/25MM
Tensile strength (N/25mm)
122.57
Dielectric breakdown (V)
6000
Insulation class (°C)
180
IN-27176 double-sided
Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
° 68 - 72 F / 20 - 22 C
° 50 - 70% relative humidity
° Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun)

Preparation of the surface
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.

Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle
This is a permanent tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …

Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US