أعلى الصفحة

ABI electrical polyimide-film silicone-adhesive insulation | 7175

العنصر رقم WEB0096
IN-7175 is a polyimide (PI) anti-static (ESD) treated, single-coated tape with silicone adhesive allowing for an excellent performance in electrical and thermal insulation. Top performance features: Dimensionally stable at high temperatures  Flame retardent and chemical resistant Excellent heat, col
لا يمكن طلب هذا المنتج في الوقت الراهن.

وصف

IN-7175 is a polyimide (PI) anti-static (ESD) treated, single-coated tape with silicone adhesive allowing for an excellent performance in electrical and thermal insulation.

Top performance features:
  • Dimensionally stable at high temperatures 
  • Flame retardent and chemical resistant
  • Excellent heat, cold, solvent and voltage resistance 
  • Designed to minimize static effect during stripping and peeling
  • Allows for good die-cutting possibilities
Application: 
  • Serves as a mask for printed circuit boards during wave solder or solder dip process
  • Protects specific areas of a PCB, e.g. by applying die-cuts
Our tape is the alternative product for:

3MSaint-Gobain
3M 5419 low static polyimide film tapeSaint-Gobain CHR K290ESD polyimide film with high-temperature silicone adhesive and excellent electrostatic discharge properties

Available standard sizes:
  • 10MMX33M
  • 15MMX33M
  • 25MMX33M
  • 30MMX33M
  • 35MMX33M
Dots with diameters of 6, 8, 10, 12, 14, 15 mm. 

If you need a customized size, please contact our product specialist.

المواصفات

-- PROPERTIES --
----------
Application
INSULATION
Product
7175
Color
AMBER
Total thickness (micron)
65
Backing material
POLYIMIDE FILM
Thickness backing
0.025MM
Adhesive system
SILICONE ADHESIVE
Thickness adhesive
0.04MM
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
63
Peel adhesion 180° (N/25MM) (Afera 5001)
6N/25MM
Tensile strength (N/25mm)
122.57
Dielectric breakdown (V)
6000
Insulation class (°C)
180

ABI electrical polyimide-film silicone-adhesive insulation | 7175

العنصر رقم WEB0096
IN-7175 is a polyimide (PI) anti-static (ESD) treated, single-coated tape with silicone adhesive allowing for an excellent performance in electrical and thermal insulation. Top performance features: Dimensionally stable at high temperatures  Flame retardent and chemical resistant Excellent heat, col
لا يمكن طلب هذا المنتج في الوقت الراهن.

وصف

IN-7175 is a polyimide (PI) anti-static (ESD) treated, single-coated tape with silicone adhesive allowing for an excellent performance in electrical and thermal insulation.

Top performance features:
  • Dimensionally stable at high temperatures 
  • Flame retardent and chemical resistant
  • Excellent heat, cold, solvent and voltage resistance 
  • Designed to minimize static effect during stripping and peeling
  • Allows for good die-cutting possibilities
Application: 
  • Serves as a mask for printed circuit boards during wave solder or solder dip process
  • Protects specific areas of a PCB, e.g. by applying die-cuts
Our tape is the alternative product for:

3MSaint-Gobain
3M 5419 low static polyimide film tapeSaint-Gobain CHR K290ESD polyimide film with high-temperature silicone adhesive and excellent electrostatic discharge properties

Available standard sizes:
  • 10MMX33M
  • 15MMX33M
  • 25MMX33M
  • 30MMX33M
  • 35MMX33M
Dots with diameters of 6, 8, 10, 12, 14, 15 mm. 

If you need a customized size, please contact our product specialist.

المواصفات

-- PROPERTIES --
----------
Application
INSULATION
Product
7175
Color
AMBER
Total thickness (micron)
65
Backing material
POLYIMIDE FILM
Thickness backing
0.025MM
Adhesive system
SILICONE ADHESIVE
Thickness adhesive
0.04MM
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
63
Peel adhesion 180° (N/25MM) (Afera 5001)
6N/25MM
Tensile strength (N/25mm)
122.57
Dielectric breakdown (V)
6000
Insulation class (°C)
180
Image slider
Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
° 68 - 72 F / 20 - 22 C
° 50 - 70% relative humidity
° Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun)

Preparation of the surface
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.

Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle
This is a permanent tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …

Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US