Top of the page

TR-1320 | Transfer Tape | polypropylene film | rubber adhesive | high tack

Item No. WEB0007
High tack transfer film for vinyl transfer applications. Top performance features: small sized one-piece decal, lettering smaller than 5 cm superior adhesion to liner and ultra clear reduces tunneling and dog-eared corners Application: vinyl transfer Available standard sizes: 1220MMX91.44M If you ne
       

Description

High tack transfer film for vinyl transfer applications.

Top performance features:
  • small sized one-piece decal, lettering smaller than 5 cm
  • superior adhesion to liner and ultra clear
  • reduces tunneling and dog-eared corners
Application:
  • vinyl transfer
Available standard sizes:
  • 1220MMX91.44M
If you need a customized size, please contact our product specialist.

Shelf life: 30 months

Specifications

-- PROPERTIES --
----------
Application
TRANSFER
Product
1320
Color
CLEAR
Total thickness (micron)
100
Backing material
POLYPROPYLENE FILM
Adhesive system
RUBBER ADHESIVE
Duration bond
TEMPORARY
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
665
Peel adhesion 90° (N/25MM) (Afera 5001)
3.6N/25MM
Peel adhesion 180° (N/25MM) (Afera 5001)
5.8N/25MM
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
184
Tensile strength (N/25mm)
66
Tack level (ASTM D3121)
ROLLING BALL 63CM
TR-1320
TR-1320
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

The target surface should be clean and dust free.
If this is not the case, clean the target surface with suitable cleaning products. For example if the target surface is a window, clean it with window cleaner.

Unwinding

Unwinding of the transfer tape can be done manually or with a laminator machine. If you unwind manually it’s best to unwind with the adhesive side facing down. If you apply the application tape with a laminator make sure the adhesive side is facing down and the tension is not too high.

Application - act

Dry application:
  • Place the vinyl graphic on a stable & flat surface (vinyl facing up).2.    Apply the transfer tape on the vinyl graphic with the adhesive side facing the vinyl.
  • Squeegee the transfer tape onto the graphic from the centre out.
  • Turn the graphic upside down and peel the liner away from the graphic.
  • Apply the graphic to its target surface with the vinyl facing the surface.
  • Squeegee the graphic onto the target surface from the centre out to remove bubbles. Make sure the graphic adheres fully to the target surface.
  • Remove the transfer tape from the applied graphic by peeling back at an angle of 45° and discard the transfer tape.
Wet application:
  • Place the vinyl graphic on a stable & flat surface (vinyl facing up).
  • Apply the transfer tape on the vinyl graphic with the adhesive side facing the vinyl.
  • Squeegee the transfer tape onto the graphic from the centre out.
  • Turn the graphic upside down and peel the liner away from the graphic.
  • Spray the target surface and/or the graphic on the adhesive side with water with a drop of soap/dish.
  • Apply the graphic to its target surface with the vinyl facing the surface. Reposition if necessary. Wet application makes repositioning easy.
  • Squeegee the graphic onto the target surface from the centre out to remove bubbles. Make sure the graphic adheres fully to the target surface.
  • Remove the transfer tape from the applied graphic by peeling back at an angle of 45° and discard the transfer tape.
Application - function

The transfer tape will transfer the vinyl graphic onto the target surface.

Removal

Remove the transfer tape from the applied graphic by peeling back at an angle of 45°.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Ken De Bruyne | Business Unit Manager | Industrial (protective), Graphical & Shoe products
phone +32 55 23 51 89 | mobile +32 472 54 44 38 | mail 
ken.debruyne@abitape.eu
CONTACT US

TR-1320 | Transfer Tape | polypropylene film | rubber adhesive | high tack

Item No. WEB0007
High tack transfer film for vinyl transfer applications. Top performance features: small sized one-piece decal, lettering smaller than 5 cm superior adhesion to liner and ultra clear reduces tunneling and dog-eared corners Application: vinyl transfer Available standard sizes: 1220MMX91.44M If you ne
       

Description

High tack transfer film for vinyl transfer applications.

Top performance features:
  • small sized one-piece decal, lettering smaller than 5 cm
  • superior adhesion to liner and ultra clear
  • reduces tunneling and dog-eared corners
Application:
  • vinyl transfer
Available standard sizes:
  • 1220MMX91.44M
If you need a customized size, please contact our product specialist.

Shelf life: 30 months

Specifications

-- PROPERTIES --
----------
Application
TRANSFER
Product
1320
Color
CLEAR
Total thickness (micron)
100
Backing material
POLYPROPYLENE FILM
Adhesive system
RUBBER ADHESIVE
Duration bond
TEMPORARY
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
665
Peel adhesion 90° (N/25MM) (Afera 5001)
3.6N/25MM
Peel adhesion 180° (N/25MM) (Afera 5001)
5.8N/25MM
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
184
Tensile strength (N/25mm)
66
Tack level (ASTM D3121)
ROLLING BALL 63CM
TR-1320
TR-1320
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

The target surface should be clean and dust free.
If this is not the case, clean the target surface with suitable cleaning products. For example if the target surface is a window, clean it with window cleaner.

Unwinding

Unwinding of the transfer tape can be done manually or with a laminator machine. If you unwind manually it’s best to unwind with the adhesive side facing down. If you apply the application tape with a laminator make sure the adhesive side is facing down and the tension is not too high.

Application - act

Dry application:
  • Place the vinyl graphic on a stable & flat surface (vinyl facing up).2.    Apply the transfer tape on the vinyl graphic with the adhesive side facing the vinyl.
  • Squeegee the transfer tape onto the graphic from the centre out.
  • Turn the graphic upside down and peel the liner away from the graphic.
  • Apply the graphic to its target surface with the vinyl facing the surface.
  • Squeegee the graphic onto the target surface from the centre out to remove bubbles. Make sure the graphic adheres fully to the target surface.
  • Remove the transfer tape from the applied graphic by peeling back at an angle of 45° and discard the transfer tape.
Wet application:
  • Place the vinyl graphic on a stable & flat surface (vinyl facing up).
  • Apply the transfer tape on the vinyl graphic with the adhesive side facing the vinyl.
  • Squeegee the transfer tape onto the graphic from the centre out.
  • Turn the graphic upside down and peel the liner away from the graphic.
  • Spray the target surface and/or the graphic on the adhesive side with water with a drop of soap/dish.
  • Apply the graphic to its target surface with the vinyl facing the surface. Reposition if necessary. Wet application makes repositioning easy.
  • Squeegee the graphic onto the target surface from the centre out to remove bubbles. Make sure the graphic adheres fully to the target surface.
  • Remove the transfer tape from the applied graphic by peeling back at an angle of 45° and discard the transfer tape.
Application - function

The transfer tape will transfer the vinyl graphic onto the target surface.

Removal

Remove the transfer tape from the applied graphic by peeling back at an angle of 45°.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Ken De Bruyne | Business Unit Manager | Industrial (protective), Graphical & Shoe products
phone +32 55 23 51 89 | mobile +32 472 54 44 38 | mail 
ken.debruyne@abitape.eu
CONTACT US