أعلى الصفحة

PR-0498 | HVAC Tape | protection | aluminium foil | acrylic adhesive

العنصر رقم WEB0023
PR-0498 is a 30-micron high tensile strength aluminium foil backing, coated with an acrylic adhesive, protected by an easy-release silicone release paper liner. Top performance features: aluminium backing provides excellent reflection of both heat and light excellent sealing performance low moisture
لا يمكن طلب هذا المنتج في الوقت الراهن.

وصف

PR-0498 is a 30-micron high tensile strength aluminium foil backing, coated with an acrylic adhesive, protected by an easy-release silicone release paper liner.

Top performance features:
  • aluminium backing provides excellent reflection of both heat and light
  • excellent sealing performance
  • low moisture vapour transmission rate makes PR0498 an excellent vapour barrier
  • good aging resistance
Application:
  • used in the HVAC industry to keep vapor, air and other gasses inside the ducts thereby reducing leakage, energy and air consumption and protecting the exterior from possible negative effects of leaking vapor, air and gasses
  • used in many industrial applications to reflect heat and light thereby reducing temperature increases or light effects inside ducts transporting liquids and gasses or on other substrates helping to avoid damage by heat and/or light
Available standard sizes:
  • 50MMx50M
  • 75MMx50M
  • 50MMx20M
  • 65MMx50M
  • 98.5MMx50M
  • 1040MMx50M
If you need a customized size, please contact our product specialist.

المواصفات

-- PROPERTIES --
----------
Application
PROTECTION
Product
0498
Color
SILVER
Total thickness (micron)
70
Backing material
ALUMINIUM FOIL
Adhesive system
ACRYLIC ADHESIVE
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
3
Peel adhesion 90° (N/25MM) (Afera 5001)
12N/25MM
Tensile strength (N/25mm)
45
PR-0498
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.

Unwinding

Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act

Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal

Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US

PR-0498 | HVAC Tape | protection | aluminium foil | acrylic adhesive

العنصر رقم WEB0023
PR-0498 is a 30-micron high tensile strength aluminium foil backing, coated with an acrylic adhesive, protected by an easy-release silicone release paper liner. Top performance features: aluminium backing provides excellent reflection of both heat and light excellent sealing performance low moisture
لا يمكن طلب هذا المنتج في الوقت الراهن.

وصف

PR-0498 is a 30-micron high tensile strength aluminium foil backing, coated with an acrylic adhesive, protected by an easy-release silicone release paper liner.

Top performance features:
  • aluminium backing provides excellent reflection of both heat and light
  • excellent sealing performance
  • low moisture vapour transmission rate makes PR0498 an excellent vapour barrier
  • good aging resistance
Application:
  • used in the HVAC industry to keep vapor, air and other gasses inside the ducts thereby reducing leakage, energy and air consumption and protecting the exterior from possible negative effects of leaking vapor, air and gasses
  • used in many industrial applications to reflect heat and light thereby reducing temperature increases or light effects inside ducts transporting liquids and gasses or on other substrates helping to avoid damage by heat and/or light
Available standard sizes:
  • 50MMx50M
  • 75MMx50M
  • 50MMx20M
  • 65MMx50M
  • 98.5MMx50M
  • 1040MMx50M
If you need a customized size, please contact our product specialist.

المواصفات

-- PROPERTIES --
----------
Application
PROTECTION
Product
0498
Color
SILVER
Total thickness (micron)
70
Backing material
ALUMINIUM FOIL
Adhesive system
ACRYLIC ADHESIVE
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
3
Peel adhesion 90° (N/25MM) (Afera 5001)
12N/25MM
Tensile strength (N/25mm)
45
PR-0498
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.

Unwinding

Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act

Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal

Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US