TR-0782 | Vinyl Transfer Tape | saturated paper | rubber adhesive | medium tack
العنصر رقم WEB0042
Medium tack thick transfer paper that will work for 80% of your vinyl transfer applications and when more stability and strength is needed. Top performance features : Small to medium sized one-piece decal, lettering from 5 cm up to 30 cm Superior adhesion to liner Reduces tunneling and dog-eared cor
لا يمكن طلب هذا المنتج في الوقت الراهن.
وصف
Medium tack thick transfer paper that will work for 80% of your vinyl transfer applications and when more stability and strength is needed.
Top performance features:
Shelf life: 30 months
Top performance features:
- Small to medium sized one-piece decal, lettering from 5 cm up to 30 cm
- Superior adhesion to liner
- Reduces tunneling and dog-eared corners
- Strong application tape with dimensional stability and resistance to humidity
- Good choice for wet applications.
- Vinyl transfer
- 1220MMX100M
Shelf life: 30 months
المواصفات
- -- PROPERTIES --
- ----------
- Application
- TRANSFER
- Product
- 0782
- Color
- WHITE
- Total thickness (micron)
- 140
- Backing material
- SATURATED PAPER
- Adhesive system
- RUBBER ADHESIVE
- Duration bond
- TEMPORARY
- -- PERFORMANCE --
- ----------
- Elongation (%) (Afera 5004)
- 40
- Peel adhesion 90° (N/25MM) (Afera 5001)
- 1.4N/25MM
- Peel adhesion 180° (N/25MM) (Afera 5001)
- 2.7N/25MM
- Dwell time (hrs)
- 72
- Peel multiplier @ dwell time (%)
- 176
- Tensile strength (N/25mm)
- 92
- Tack level (ASTM D3121)
- ROLLING BALL 16CM
Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
The target surface should be clean and dust free.
If this is not the case, clean the target surface with suitable cleaning products. For example if the target surface is a window, clean it with window cleaner.
Unwinding
Unwinding of the transfer tape can be done manually or with a laminator machine. If you unwind manually it’s best to unwind with the adhesive side facing down. If you apply the application tape with a laminator make sure the adhesive side is facing down and the tension is not too high.
Application - act
Dry application:
The transfer tape will transfer the vinyl graphic onto the target surface.
Removal
Remove the transfer tape from the applied graphic by peeling back at an angle of 45°.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
- 68 - 72 F / 20 - 22 C
- 50 - 70% relative humidity
- Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
The target surface should be clean and dust free.
If this is not the case, clean the target surface with suitable cleaning products. For example if the target surface is a window, clean it with window cleaner.
Unwinding
Unwinding of the transfer tape can be done manually or with a laminator machine. If you unwind manually it’s best to unwind with the adhesive side facing down. If you apply the application tape with a laminator make sure the adhesive side is facing down and the tension is not too high.
Application - act
Dry application:
- Place the vinyl graphic on a stable & flat surface (vinyl facing up).2. Apply the transfer tape on the vinyl graphic with the adhesive side facing the vinyl.
- Squeegee the transfer tape onto the graphic from the centre out.
- Turn the graphic upside down and peel the liner away from the graphic.
- Apply the graphic to its target surface with the vinyl facing the surface.
- Squeegee the graphic onto the target surface from the centre out to remove bubbles. Make sure the graphic adheres fully to the target surface.
- Remove the transfer tape from the applied graphic by peeling back at an angle of 45° and discard the transfer tape.
- Place the vinyl graphic on a stable & flat surface (vinyl facing up).
- Apply the transfer tape on the vinyl graphic with the adhesive side facing the vinyl.
- Squeegee the transfer tape onto the graphic from the centre out.
- Turn the graphic upside down and peel the liner away from the graphic.
- Spray the target surface and/or the graphic on the adhesive side with water with a drop of soap/dish.
- Apply the graphic to its target surface with the vinyl facing the surface. Reposition if necessary. Wet application makes repositioning easy.
- Squeegee the graphic onto the target surface from the centre out to remove bubbles. Make sure the graphic adheres fully to the target surface.
- Remove the transfer tape from the applied graphic by peeling back at an angle of 45° and discard the transfer tape.
The transfer tape will transfer the vinyl graphic onto the target surface.
Removal
Remove the transfer tape from the applied graphic by peeling back at an angle of 45°.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Ken De Bruyne | Business Unit Manager | Industrial (protective), Graphical & Shoe products
phone +32 55 23 51 89 | mobile +32 472 54 44 38 | mail ken.debruyne@abitape.eu
Ken De Bruyne | Business Unit Manager | Industrial (protective), Graphical & Shoe products
phone +32 55 23 51 89 | mobile +32 472 54 44 38 | mail ken.debruyne@abitape.eu
CONTACT US
TR-0782 | Vinyl Transfer Tape | saturated paper | rubber adhesive | medium tack
العنصر رقم WEB0042
Medium tack thick transfer paper that will work for 80% of your vinyl transfer applications and when more stability and strength is needed. Top performance features : Small to medium sized one-piece decal, lettering from 5 cm up to 30 cm Superior adhesion to liner Reduces tunneling and dog-eared cor
لا يمكن طلب هذا المنتج في الوقت الراهن.
وصف
Medium tack thick transfer paper that will work for 80% of your vinyl transfer applications and when more stability and strength is needed.
Top performance features:
Shelf life: 30 months
Top performance features:
- Small to medium sized one-piece decal, lettering from 5 cm up to 30 cm
- Superior adhesion to liner
- Reduces tunneling and dog-eared corners
- Strong application tape with dimensional stability and resistance to humidity
- Good choice for wet applications.
- Vinyl transfer
- 1220MMX100M
Shelf life: 30 months
المواصفات
- -- PROPERTIES --
- ----------
- Application
- TRANSFER
- Product
- 0782
- Color
- WHITE
- Total thickness (micron)
- 140
- Backing material
- SATURATED PAPER
- Adhesive system
- RUBBER ADHESIVE
- Duration bond
- TEMPORARY
- -- PERFORMANCE --
- ----------
- Elongation (%) (Afera 5004)
- 40
- Peel adhesion 90° (N/25MM) (Afera 5001)
- 1.4N/25MM
- Peel adhesion 180° (N/25MM) (Afera 5001)
- 2.7N/25MM
- Dwell time (hrs)
- 72
- Peel multiplier @ dwell time (%)
- 176
- Tensile strength (N/25mm)
- 92
- Tack level (ASTM D3121)
- ROLLING BALL 16CM
Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
The target surface should be clean and dust free.
If this is not the case, clean the target surface with suitable cleaning products. For example if the target surface is a window, clean it with window cleaner.
Unwinding
Unwinding of the transfer tape can be done manually or with a laminator machine. If you unwind manually it’s best to unwind with the adhesive side facing down. If you apply the application tape with a laminator make sure the adhesive side is facing down and the tension is not too high.
Application - act
Dry application:
The transfer tape will transfer the vinyl graphic onto the target surface.
Removal
Remove the transfer tape from the applied graphic by peeling back at an angle of 45°.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
- 68 - 72 F / 20 - 22 C
- 50 - 70% relative humidity
- Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
The target surface should be clean and dust free.
If this is not the case, clean the target surface with suitable cleaning products. For example if the target surface is a window, clean it with window cleaner.
Unwinding
Unwinding of the transfer tape can be done manually or with a laminator machine. If you unwind manually it’s best to unwind with the adhesive side facing down. If you apply the application tape with a laminator make sure the adhesive side is facing down and the tension is not too high.
Application - act
Dry application:
- Place the vinyl graphic on a stable & flat surface (vinyl facing up).2. Apply the transfer tape on the vinyl graphic with the adhesive side facing the vinyl.
- Squeegee the transfer tape onto the graphic from the centre out.
- Turn the graphic upside down and peel the liner away from the graphic.
- Apply the graphic to its target surface with the vinyl facing the surface.
- Squeegee the graphic onto the target surface from the centre out to remove bubbles. Make sure the graphic adheres fully to the target surface.
- Remove the transfer tape from the applied graphic by peeling back at an angle of 45° and discard the transfer tape.
- Place the vinyl graphic on a stable & flat surface (vinyl facing up).
- Apply the transfer tape on the vinyl graphic with the adhesive side facing the vinyl.
- Squeegee the transfer tape onto the graphic from the centre out.
- Turn the graphic upside down and peel the liner away from the graphic.
- Spray the target surface and/or the graphic on the adhesive side with water with a drop of soap/dish.
- Apply the graphic to its target surface with the vinyl facing the surface. Reposition if necessary. Wet application makes repositioning easy.
- Squeegee the graphic onto the target surface from the centre out to remove bubbles. Make sure the graphic adheres fully to the target surface.
- Remove the transfer tape from the applied graphic by peeling back at an angle of 45° and discard the transfer tape.
The transfer tape will transfer the vinyl graphic onto the target surface.
Removal
Remove the transfer tape from the applied graphic by peeling back at an angle of 45°.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Ken De Bruyne | Business Unit Manager | Industrial (protective), Graphical & Shoe products
phone +32 55 23 51 89 | mobile +32 472 54 44 38 | mail ken.debruyne@abitape.eu
Ken De Bruyne | Business Unit Manager | Industrial (protective), Graphical & Shoe products
phone +32 55 23 51 89 | mobile +32 472 54 44 38 | mail ken.debruyne@abitape.eu
CONTACT US